MAXXEON New Product IconMAXXEON Prop 65 Logo

MAXXEON CYCLOPS WorkStar® 810 Rechargeable Commercial Grade LED Work Light

The WorkStar® 810 CYCLOPS is a competitively priced, commercial grade, USB rechargeable LED inspection light that produces 720/360/180 lumens, and runs for 2/4.5/10 hours.


The MAXXEON CYCLOPS WorkStar® 810 is a USB rechargeable work light that fits nicely in your hand, but it also has a handle with a built in magnet and a 1/4"-20 tripod socket. The handle rotates 360 degrees, with 12 intended positions. The handle can be used as a handle, or as a stand to support and aim the light. The powerful magnetic base in the handle can be fastened to any ferrous metal surface. The tripod socket in the handle of the 810 adds new mounting flexibility. The optional octopus tripod can be used as a tripod or a "hook" (see photo above). The optional suction cup can be fastened to glass (see photo above) or other smooth surfaces. The magnetic base is covered with a protective coating making it the perfect cordless inspection light for mechanics, technicians and anybody who works with their hands.

Performance Upgrade

Breaking News: CYCLOPS has been upgraded to 3 brightness settings: 720 lumens on High with a run time of 2 hr, 360 lm on Medium with a run time 4.5 hr and 180 lm on Low with a run time of 10 hr. Twice as bright as before on High and the run time has been doubled on Medium (formally High) and Low.

As Before: Other handheld rechargeable work lights have a vertical strip of LEDs and an odd oval beam pattern. Not CYCLOPS! It creates a perfectly round beam pattern using a square array of 9 LEDs and a custom wide angle lens. Four green LEDs work in 25% increments to show the battery level while in use and while charging. Charge time is about 3 hr. Using the latest LiPo (Li-ion Polymer) battery technology, this commercial grade work light includes a USB cord for easy recharging in the shop or on the go.


The rugged WorkStar® 810 commercial grade professional LED work light is designed for daily use by technicians in demanding shop, manufacturing and maintenance environments. The tough ABS body, polycarbonate lens and nylon handle are virtually indestructible. The rugged power switch is rated at 50,000 cycles and is sealed to avoid contamination by dirt and grit. It's a great cordless inspection light for HVAC and auto techs, as well as other trades like plumbers and electricians.

MAXXEON CYCLOPS WorkStar® 810 Icon

Accessory: Suction Cup

This sturdy suction cup screws into the 1/4"-20 socket in the nylon handle. It will securely fasten the WorkStar® 810 to smooth surfaces like glass. Order MXN10170.

Accessory: Octopus Tripod

This flexible "octopus" mini tripod screws into the 1/4"-20 socket in the nylon handle. The legs can function like hooks to grip surfaces that are otherwise difficult for mounting the light. Order MXN10171.

Accessory: Car USB Adapter

Need a USB adapter for your car? Order MXN10132 in Buy Parts Online from MAXXEON.

LED Brightness (Luminous Flux) High: 720 lumens, Medium: 360 lumens, Low: 180 lumens
LED, Color, Power Custom Array, Daylight White, 3.8 W
Beam Ratio 9 LEDs arranged in a square patten + a custom designed lens creates a round floodlight beam - no rings, no shadows, no hot spots. The beam diameter to distance ratio is about 2:1, meaning for example, the beam diameter is about 4 ft wide when the light is 2 ft from an object. The ANSI FL-1 beam throw is 108 ft (33 m).
Power/Brightness Switch Sealed power switch cycles through Low-High-Off...
Battery Included 3.7V 1800mAh LiPo (Li-ion Polymer) rechargeable battery; USB recharging cord included
Run Time High: 2 hours, Medium: 4.5 hours, Low: 10 hours
Recharge Time 3 hours
Battery Life and Charge Indicator 4 green LEDs work in 25% increments to show the battery level while in use and while charging
Charging Input Micro USB
Body Material ABS plastic
Magnetic Base Built into the base of the handle is a powerful magnet with a protective covering. The magnetic strength of the WorkStar® 810 was increased relative to the WorkStar® 800.
Tripod Socket Built into the base of the handle is a standard camera 1/4"-20 tripod socket, which is the mounting point for the optional octopus tripod stand and the optional suction cup
Handle The handle rotates 360 degrees with 12 indented positions. It can be used as a handle, a stand, or the built in magnet can be fastened to ferrous metal surfaces so the light can be aimed. It is also the mounting point for the optional octopus tripod stand and the optional suction cup.
Length 3 1/2 inches (9 cm), with handle 4 1/4 (11 cm)
Width 2 3/8 inches (6 cm), with handle 3 (7.5 cm)
Thickness 1 inch (2.5 cm)
Weight 7 ounces (200 grams)
Temperature 15º to 105ºF (-10º to +40ºC)
Ingress Protection IP64 = water resistant, i.e., protection from rain, sprays and splashing of water in all directions. But not waterproof, do not immerse in liquids.
Impact Test IK07 = 2 J
Drop Test 6 ft (2 m)
Included WorkStar® 810, 18 inch (45 cm) USB charging cord
Warranty 1 year against manufacturing defects
Prop 65 Complies with California Proposition 65
UNSPSC code 39111610 Flashlight
Barcode 629203008103
Shop Online $32.34  WorkStar® 810 CYCLOPS MXN00810
$9.95  Suction Cup MXN10170
$9.95  Octopus Tripod MXN10171

✱ New or improved performance compared to previous model

Cliff P. Testimonial

I bought this little light from a tool truck, it's been left on cars for test drives, it's fallen off of cars several times, I've dropped it quite a few times, and ran over once by an F-150. I can't kill this light. It still charges up and bright as ever. Thank you for a great product.

MAXXEON WorkStar® 800 photo from Cliff

Steve T. Testimonial

I have been using my 810 as bow light. This photo was taken this morning as I went out to drop crab pots. Works great!

MAXXEON WorkStar® 810 photo from Steve

Takes a Heating & Keeps on Beating

MAXXEON WorkStar® 800 photo from JK

Field Test Reports by

Three experienced hikers tested the WorkStar® 800 during the summer of 2018. Click on the following link to read the test reports.