MAXXEON WorkStar® 220 LED Penlight Pocket Floodlight

The WorkStar® 220 is a professional, 3xAAAA battery LED penlight that produces 140 lumens, runs for 35 minutes and is competitively priced.

Practical

The MAXXEON WorkStar® 220 is a professional LED penlight that uses 3 AAAA Alkaline batteries. LED penlights and LED inspection penlights generally have weak and/or narrow beams. Not the Professional LED Pocket Floodlight. It has a bigger and brighter beam to perfectly illuminate your work. Many flashlights claim to be EDC (Every Day Carry), but this compact, 6" EDC flashlight weighs only an ounce, and clips easily and comfortably into any pocket. It's always at the ready! The Pocket Floodlight is the ultimate EDC light.

Performance

The MAXXEON WorkStar® 220 is brighter than ordinary LED penlights. Just as important is the size of the beam. The Pocket Floodlight's beam is very wide compared to other LED penlights, but is it really a floodlight? Well, not exactly, but it is much more useful than other LED penlights and LED inspection lights. See the "Reflector" line of the performance table for more details. Our LED Pocket Floodlight is just what you've been waiting for, so wait no more!

Professional

The rugged WorkStar® 220 LED Pocket Floodlight is designed for daily use by technicians in demanding shop, manufacturing and maintenance environments. The tough T6 aluminum body is anodized black and is virtually indestructible. All threaded joints have rubber O-ring seals so it is IP67, dust tight & waterproof to 3 ft. The rugged tailcap switch is rated at 100,000 cycles and is sealed to avoid contamination by dirt and grit. In addition, the switch has the standard ON/OFF operation, plus a handy momentary action position.

PARAMETER PERFORMANCE
LED Brightness (Luminous Flux) 140 OTF lumens (out the front)
LED, Color, Power Cree XP-E, Cool White, 3 W
Reflector Custom designed flood reflector with Orange Peel finish creates a wide floodlight beam - no rings, no shadows, no hot spots. The beam diameter to distance ratio is about 1:1, meaning for example, the beam diameter is about 2 ft wide when the light is 2 ft from an object.
Switch Tailcap click ON / click OFF + Momentary ON. Equipped with a rubber switch cap that seals out dirt.
Battery Included 3 AAAA alkaline
Battery Voltage Range 4.8 - 3.3 volts
Run Time 2 hours to half brightness & 4 hours useable light with typical intermittent use
Lens Equipped with a user replaceable glass lens. Note: replacement glass lenses are available from Buy Parts Online from MAXXEON
Aluminum Body & Head T6 Aluminum with Black Type II Anodizing
Length 6 inches (15 cm)
Diameter 9/16 inches (14 mm)
Weight 1 ounce (28 grams)
Temperature 15º to 105ºF (-10º to +40ºC)
Ingress Protection IP67 = dust tight & waterproof to 3 ft (1 m) - Threaded joints have rubber O-ring seals & tailcap switch is sealed with a rubber cap
Drop Test 6 ft (2 m)
Included WorkStar® 220, pen clip, 3 AAAA alkaline batteries
Warranty 1 year against manufacturing defects
UNSPSC code 39111610 Flashlight
Barcode 629203002200
Shop Online $23.94  WorkStar® 220 MXN00220