MAXXEON WorkStar® 420 INSPECTOR MAXX Combination LED Work Light/Penlight

The WorkStar® 420 INSPECTOR MAXX is a rugged, rechargeable, industrial grade combination 200 lm 6-LED work light plus a 135 lm penlight and is competitively priced.

Practical

INSPECTOR MAXX says don't waste your money on batteries, get the inspection light that pays for itself!




MAXXEON WorkStar® 420 INSPECTOR MAXX Icon








Performance

The MAXXEON WorkStar® 420 (aka INSPECTOR MAXX) is a rugged, industrial-grade combination 200 lm 6-LED work light plus a 135 lm penlight. Not only that, it's rechargeable! Using the latest LiPo (Li-ion Polymer) battery technology, it includes a red/green "Charge" indicator LED, a micro USB port and an USB cord for easy recharging.

INSPECTOR MAXX also features a sturdy pocket clip with a built in magnet. You can clip it to your pocket with the work light illuminating your work area, or stick the magnet on a convenient ferrous surface to light up your work area. Or, you can hold on to the body and use it as either a work light or a penlight. No wonder INSPECTOR MAXX says, "Turn me on and start INSPECTING!"

Professional

The rugged WorkStar® 420 LED Pocket Floodlight is designed for daily use by technicians in demanding shop, manufacturing and maintenance environments. The tough aluminum body is anodized red and is virtually indestructible. The rugged tailcap switch is rated at 100,000 cycles and is sealed to avoid contamination by dirt and grit.

PARAMETER PERFORMANCE
LED Brightness (Luminous Flux) Work Light: 200 lumens, Penlight: 135 lumens
LED, Color, Power Custom, Cool White, 3 W
Work Light Beam 6 inline LEDs + a custom designed lens creates a floodlight beam - no rings, no shadows, no hot spots. The beam diameter to distance ratio is 1.5:1, for example, the beam diameter is 3 ft wide when the light is 2 ft from an object.
Penlight Beam Custom designed flood reflector creates a handy narrow beam - no rings, no shadows, no hot spots. The beam diameter to distance ratio is about 1:2, for example, the beam diameter is 1 ft wide when the light is 2 ft from an object. The ANSI FL-1 beam throw is 138 ft (42 m).
Power/Brightness Switch Push button switch cycles through Work Light-Penlight-Off...
Battery Included 3.7V 800mAh LiPo (Li-ion Polymer) rechargeable battery; USB recharging cord included
Run Time Work Light: 1.5 hours, Penlight: 2 hours
Recharge Time 2.5 hours
Charge Indicator Red/green LED
Charging Input Micro USB
Aluminum Body Rugged Aluminum with Red Type II Anodizing and Black Plastic Accents
Magnetic Penclip A handy magnet is built into the penclip
Length 7 inches (18 cm)
Width 7/8 inches (2.2 cm)
Thickness 1/2 inches (1.3 cm)
Weight 2.2 ounce (61 grams)
Temperature 15º to 105ºF (-10º to +40ºC)
Ingress Protection IPX4 = water resistant, i.e., protection from rain, sprays and splashing of water in all directions. But not waterproof, do not immerse in liquids.
Drop Test 6 ft (2 m)
Included WorkStar® 420, 18 inch (45 cm) USB charging cord
Warranty 1 year against manufacturing defects
UNSPSC code 39111610 Flashlight
Barcode 629203004204
Shop Online $32.34  WorkStar® 420 MXN00420