WorkStar® 2003 NDT 365nm UV-A Inspection Light (Beam Distance: 15 in)

WorkStar 2003 Features ThumbnailWorkStar® 2003 Features
The Maxxeon WorkStar® 2003 - more powerful, more features and more versatile than the competition.
WorkStar® 2003 Hand ThumbnailWorkStar® 2003 Hand
The Maxxeon WorkStar® 2003 has an ergonomic hand grip that is comfortable to hold.
WorkStar® 2003 Standing ThumbnailWorkStar® 2003 Standing
The Maxxeon WorkStar® 2003 - the best rechargeable 365nm LED NDT work light available.
WorkStar® 2003 Standing ThumbnailWorkStar® 2003 Standing
The smooth metalized reflector concentrates the beam into a useful 2 in diameter hot spot, of which a 1 in diameter hot spot exceeds the ASTM E2297 Requirement of greater than 10,000 µW/cm² @ 15 inches on the HI brightness setting. In addition, there is a 12 in diameter spill beam. Typically on the LO brightness setting, the intensity exceeds the ASTM E1417 & E1444 Requirements of greater than 1,000 µW/cm² @ 15 inches in a useful 2 in diameter hot spot.
WorkStar® 2003 Belt Clip ThumbnailWorkStar® 2003 Belt Clip
The Maxxeon WorkStar® 2003 includes a handy, easy-to-remove belt clip. The pegs on the clip slip into holes in the body and the top magnet holds the clip in place. To remove the clip from the body, simply hold on to the top of the clip and pull the pegs out of the body. Or when the clip is mounted on your belt, simply pull the body away from the clip.
WorkStar® 2000 Tripod ThumbnailWorkStar® 2000 Tripod
Typically on the HI brightness setting, the intensity of the WorkStar® 2003 beam exceeds the ASTM E2297 Requirement of greater than 10,000 µW/cm² @ 15 inches in a powerful 1 in diameter hot spot. In practice, the useful region of the beam extends to a diameter of 2 in where the beam is greater than 4,000 µW/cm². The spill beam has a diameter of 12 in.
WorkStar® 2000 Tripod ThumbnailWorkStar® 2000 Tripod
Typically, the wavelength of the WorkStar® 2003 is 367 nm and ranges between 365 and 370 nm.
WorkStar® 2000 Tripod ThumbnailWorkStar® 2000 Tripod
Need to stick your WorkStar® 2003 on aluminum or glass? Well this sturdy tripod suction cup is the answer. Available as a bundle below or separately in Buy Parts.
WorkStar® 2003 Case Study 1 ThumbnailWorkStar® 2003 Case Study 1
Many fluids naturally fluoresce at 365 nm. In this case, a commonly used aircraft oil, Mobil 2380 turbine engine oil, fluoresces blue (middle photo, bottom blade) in normal lighting conditions, when illuminated by the powerful UV beam of the WorkStar® 2003. When no leak is present, only the white light portion of the beam is visible (right photo, left blade). Photos by Tyson Ristau
WorkStar® 2003 Case Study 2 ThumbnailWorkStar® 2003 Case Study 2
Many fluids naturally fluoresce at 365 nm. In this case, a commonly used aircraft oil, Mobil 2380 turbine engine oil has leaked on the nacelle and fluoresces blue (left photo) in broad daylight, when illuminated by the powerful UV beam of the WorkStar® 2003. Without the UV light the aircraft just looks wet, so it could also be water, deice fluid, hydraulic fluid or fuel. The WorkStar® 2003 makes leak detection easy, even in daylight. Poor clean up after an oil filter change leaves a mess that would confuse future leak inspections (right photo). Checking for spills after all maintenance work is essential. Photos by Tyson Ristau


WorkStar® 2003 NDT 365nm UV-A Inspection Light (Beam Distance: 15 in)  SKU: MXN02003
Parameter Performance
LED Radiant Flux
800 mW @ emitter
LED, Wavelength
LEDEngin LZ1-30UV00, UltraViolet (UV-A) 365 - 370 nm
Typical Max Intensity
13,000 µW/cm² @ 15 in (38 cm) [HI setting]
Typical Intensity
> 10,000 µW/cm² @ 15 in (38 cm) (1 in diameter hot spot) [HI setting]
Exceeds ASTM E2297 Requirements
Typical Max Intensity (filtered)
10,000 µW/cm² @ 15 in (38 cm) [HI setting] with optional white light filter MXN10065
3,000 µW/cm² @ 15 in (38 cm) [LO setting] with optional white light filter MXN10065
Typical Intensity (filtered)
> 1,000 µW/cm² @ 15 in (38 cm) (2 in diameter hot spot) [HI & LO settings] with optional white light filter MXN10065
Exceeds ASTM E1417 & E1444 Requirements
Typical White Light Level
< 2 fc @ 15 in (38 cm) with optional white light filter MXN10065
Exceeds ASTM E1417 & E1444 Requirements
Reflector
Easy fault detection with large 6 in diameter spill beam. Features an intense center 2 in diameter hot spot for optimum fault/leak fluorescence.
Glass Lens
Tempered glass with a shock absorbing rubber gasket.
Heat sink
LED and lens are mounted in a sealed aluminum heat sink assembly, which protects the LED from dirt and fluids.
ON/OFF HI/LO Power/Intensity Switch
Recessed ON/OFF push button switch also controls 2 intensity levels.
Favorite Intensity Level Memory
Turns ON and OFF to your favorite intensity level, yet easy to change to the other level.
Batteries Included
6 AA rechargeable NiMH battery pack. Pack is user replaceable.
Run time per charge
High > 2.5 hours, Low > 10 hours
Recharge Time
About 3 hours
Regulator Circuit
High efficiency constant current circuit to maximize intensity and runtime
Charge/discharge Indicator
A bicolor LED charge/discharge level indicator flashes green and red to help you estimate the remaining runtime and recharge time
Material
High impact polycarbonate, except neck and hook, which are glass reinforced ABS
Flared Base
Stable when standing upright thanks to the wide flared base.
Hand Grip
Comfortable ergonomic hand grip
Head Rotation
Neck rotates 360 degrees
Head Tilt
Head tilts 180 degrees
Retractable Hook length
3 inches (7.5 cm) when extended; retracts into body
Hook diameter
1 inch (2.5 cm)
Magnets
2 powerful, co-planar, nickel-plated, neodymium rare-earth magnets
Belt Clip
Better than holster, this belt clip lets you use the light while clipped to your belt. It quickly clips onto the light and slips off just as easily, but sticks securely while in use.
Tripod
Standard camera tripod socket in base
Overall length
10 1/4 inches (26 cm)
Body Dimensions
6 3/4 x 2 x 2 inches (17 x 5 x 5 cm), anti-roll surfaces
Head Dimensions
3 x 1.5 x 1.5 inches (7.5 x 3.8 x 3.8 cm)
AC Power Supply
100-220 VAC 50/60 Hz UL-Approved North American power supply with standard "Type A", two prong plug
Car Charger
12 VDC car adapter
What's Included
WorkStar® 2003 with rechargeable NiMH batteries, 100-220 VAC power supply, 12 VDC car adapter, belt clip
Weight
1 lb (0.5 kg)
Warranty
1 year against manufacturing defects
Shipping & Handling per order
US$9.99 to USA (FedEx or USPS), US$19.99 to Canada (USPS or UPS),
US$99.99 to International
VISA/MasterCard
Quantity: US$299.00 for WorkStar® 2003
VISA/MasterCard
Quantity: US$379.00 for WorkStar® 2003 + White Light Filter Accessory (MXN10065)
VISA/MasterCard
Quantity: US$314.00 for WorkStar® 2003 + Tripod Suction Cup Accessory (MXN10058)
VISA/MasterCard
Quantity: US$394.00 for WorkStar® 2003 + White Light Filter (MXN10065) + Tripod Suction Cup (MXN10058) Accessories
Patents
U.S. Patent No. 7,234,833 B2     U.S. Trade Dress No. -
UNSPSC code 39112009 Portable Shop Light

Expert's Endorsement

1. NDT.net WorkStar® 2003 Info - May 2014.

2. The Fabricator WorkStar® 2003 Info - May 2014.

3. American Foundry Society WorkStar® 2003 Info - May 2014.

4. General Aviation News WorkStar® 2003 Info - May 2014.

5. NDT.org WorkStar® 2003 Info - April 2014.

6. Foundry WorkStar® 2003 Info - April 2014.

7. Aviation Pros WorkStar® 2003 Info - April 2014.

8. Vehicle Service Pros WorkStar® 2003 Info - April 2014.

9. MidStream Business WorkStar® 2003 Info - April 2014.

10. Mining WorkStar® 2003 Info - April 2014.

11. Energy Global WorkStar® 2003 Info - April 2014.

12. Vertical WorkStar® 2003 Info - April 2014.