MAXXEON® WorkStar™ Flexible LED Inspection Light

NOW AVAILABLE!

• AUTOMOTIVE TECHNICIANS • IT TECHNICIANS • FIRST RESPONSE TEAMS •
• CAMPERS • HOMEOWNERS • BOATERS •

The Maxxeon WorkStar® 440 Flexible LED Inspection Light is designed for illuminating hard-to-reach places on all equipment and vehicles. Compared to ordinary LED flex lights, the LUXEON® Rebel high-performance LED provides up to 20 times more light and runs for close to 2 hours on two AA alkaline batteries (included). A rugged 10" long gooseneck flexes to avoid obstructions in close quarters, and the small diameter of the light head allows access to tight areas. A tapered head design reduces snagging when the tool is removed from inspection areas. The gooseneck is covered with a tough PVC tube that protects the neck from dirt, grease and most liquids.

The Maxxeon WorkStar® 440 features a black, Type II anodized aluminum body and head, a rugged 12 inch PE coated flex neck and a tail clicky switch. It has a state-of-the-art DC-to-DC step-up LED driver circuit, which provides a run-time of 1.5 hours with two AA alkaline batteries, under intermittent operation. It is compatible with user-provided nickel-metal hydride (NiMH) rechargeable batteries, which can significantly extend the run-time.<br /> <br />Note: Click on the thumbnail(s) to control the slideshow.

Easy to slip into tight places, the 440's head is very small, only 18 mm in diameter. Notice how it tapers smoothly down to the neck to prevent snagging on wires and pipes, etc., when extracting it from tight spaces. Thanks to careful thermal design and the efficiency of of the Rebel LED, the head does not get hot!

Pumping out 90 lumens from the LUXEON® Rebel LED, it's bright! The orange peel reflector is custom designed for the WorkStar™ 440.

The result is a beam pattern with a nice center hot-spot and a very smooth and perfectly sized spill pattern for an inspection light.

Notice that both the hot-spot and spill are consistent, without shadows or peaks.

The beam pattern, at a distance is 6 inches, is 6 inches in diameter with a 2 inch diameter hot-spot.

The tool feels solid in your hands. It has great balance without feeling front-heavy. The flex neck holds its shape, without drooping. The extra reach is 12 inches overall, with 10 inches of flex. The flex neck is covered with a quality polyethylene (PE) tube that protects it from dirt, grease and most solvents.

The WorkStar™ 440 is not just an inspection light, there are lots of other applications. Put it into your back pocket and through your front belt loop - now you have the best dog walking, or people walking night light available. Forget weak, uncomfortable headlamps. Put the power of a 440 into your pocket and enjoy your walk.

Parameter	Performance
LED Brightness	90 lumens
LED Lifetime	>50,000 hours to 70% of initial brightness
LED Model	LUXEON® Rebel
LED Driver	State-of-the-art DC-DC electronic step-up circuit maximizes brightness & battery life
Forward Current	400 mA
Battery Voltage Range	Between 0.8 and 3.2 volts
Batteries included	2 AA alkaline
Run time with alkaline batteries	1.5 hours with typical intermittent use
Optional batteries	2 AA NiMH
Run time with NiMH batteries	Greater than 1.5 hours continuous use for 2000 mAh cells
Reflector	Custom-design with orange peel surface for smooth beam
Lens	Glass
Aluminum Body & Head	T6 Aluminum with Black Type II Anodizing
Overall length	19 inches (48 cm)
Head Diameter	11/16 inches (18 mm)
Body Diameter	13/16 inches (20 mm)
Flex neck length	12 inches (30 cm)
Flex neck covering	PE (polyethylene) tube, impervious to dirt, grease & common fluids
Weight	6.5 ounces (184 grams)
Waterproof?	No, but all threaded joints have rubber O-ring seals
Included	WorkStar™ 440, 2 AA alkaline batteries & instruction booklet
Warranty	1 year
Price	$69.95
Shipping & Handling	$9.95
Click to purchase

LED Inspection Light